If you have ever forgot or locked your keys inside your Toyota Sequoia SUV, you know how frustrating it can be. Typically, the first reaction must call a locksmith around your location to do this work, but you have to spend a lot of money on unlocking for your vehicle. However, why you should call a locksmith In fact, if you can know a method to easily recover your keys that can be apparently secured inside Toyota Sequoia SUV. Here is a good way to teach you how to break into your car to get your keys without damaging anything, if you do not want to break your car’s window down and do not want to waste your money.
The first thing you need to check all of the doors for Toyota Sequoia SUV to know if they are completely locked up.
The second thing you need to check if there is a term for the locksmith in the insurance policy for Toyota Sequoia SUV.
After mentioned two things above, there are two options that you have, depending on your materials that you use.
The first option in opening the vehicle to retrieve your keys, includes this material:
The Slim Jim is a thin strip of the metal. It is usually made from the string steel. And it is almost 2-4 centimeters in width and 60 centimeters in length. Slim Jim is also a tool. Without the use of a key or a lock pick, it used to unlock the automobile doors for Toyota Sequoia SUV. It can operate directly on the intersecting rods and levers that control the automobile door. Between the rubber seal and window of your car, you should insert the hook on the top of this tool. And then catch the bars that can easily connect the lock device.
Here are the steps to break into your Toyota Sequoia SUV by using a Slim Jim:
Utilize Slim Jim and insert it between the door frame and window, then you put it where the lock is located.
Hold Slim Jim on the right, and then yank it as long as you open your car
When Toyota Sequoia SUV is open that you can get your keys and operate Toyota Sequoia SUV
You can use another option whether the lock of your car is an automatic:
Two solid plastic
A heavy gauge wire or coat hanger
A rubber tip of the wire or a rubber band
Using these materials and follow these steps in opening your Toyota Sequoia SUV:
Slide wedge into the gap on your car’s door.
Pry the car’s door slightly in order to budge simply the additional wedge in. So this way will create a gap between your body and the door.
If you open the door, straighten the coat hanger, and then slip it in. That you can get the “unlock button”. It is often placed underneath the car’s window.
You need to press the lock button and the automobile door can be unlocked when you place the coat hanger.
Without ruining your own car, you can open your Toyota Sequoia SUV. And then you do not need to ask any help from any locksmith. Also, it cannot cost you time and money. It can be used on any car. However, if you have to ask any help from someone to subordinate you, you must ensure they are believable.
This Sequoia, locks as soon as you unlock it from above the door handle and the alarm goes off. Hit the “unlock” button and does not unlock. This is highly secure. I tried pulled the cable to unlock the hood latch, open the hood, take off the positive (red) cable and see if it turns off the security system. Finally, I would try to unlock it but it’s too tight to pull the latch cable to the hood with the grill on
Literally JUST had this problem. Slim jim will not work. It takes 2 people and a long hooked rod. You have to yank the door open at the same exact second that you pull the lock switch back. Alarm will go off but you just have to jump in and start it.